Boss Hog

Boss Hog
Boss Hog Frac Plugs have a simple design, with fewer than half the parts used in competitive plugs, so they are easier to handle and less likely to lose components or set prematurely while running in. Also, because Boss Hog plugs are smaller than competitive plugs, they produce significantly less cuttings during drillout.
Read More

ECO-Boss

ECO-Boss
ECO-Boss Frac Plugs offer a compact, economical alternative to the Boss Hog plug. Like the Boss Hog, each ECO-Boss component undergoes rigorous quality inspection, and assembled plugs are tested in our dedicated frac plug laboratory to ensure rated performance.
Read More

ECO-Hybrid

ECO-Hybrid
ECO Hybrid plugs offer cost-effective pressure isolation and exceptional resistance to pre-set in casing sizes from 2.750" through 6.250" ID. Where a well design requires maximum fluid flow to flush proppant on the previous stage or casing conditions exist where a “slick” profile is desired, the ECO Hybrid allows operators to reliably seal 10 KSI differential pressures with no compromise on drill-out performance.
Read More

Boss All Composite

Boss All Composite
Boss All Composite Frac Plugs are the latest addition to the Boss Hog Frac Plug family. Utilizing a simple, patented design, these plugs eliminate presets, slipping, and leakage and save operators thousands of dollars on the total cost of operations. The proprietary, filament-wound composite material is produced in-house under tightly- controlled temperature and humidity conditions, yielding the industry’s highest quality composite material.
Read More

REFRAC Boss Hog

REFRAC
Boss Hog
REFRAC Boss Hog plugs provide cost-effective pressure isolation in small ID liners and sleeves. Whether fracking in a patch or relining an entire lateral, the REFRAC Boss Hog plug leverages the same patented technology that is used in the Boss Hog.
Read More

XTENDED Range

XTENDED Range
XTENDED Range frac plugs deliver a more reliable and cost-effective option for challenging applications. The slimmed down outer diameter allows the XTENDED Range to pass through damaged casing, restricted internal casing diameters, and existing casing patches in the wellbore.
Read More

Dummy

Dummy
The Dummy plug is used for pumping guns down when rate or pressure is an issue. The HELISEAL on the Dummy plug doesn't cause the tool string to float when falling in the vertical. It can be pulled out at speeds of 250 ft/min. It can also be sheared off with a setting tool and left downhole.
Read More